About The S7™ Bipod
S7™ Bipod Overview
The S7™ is the most up-to-date, fully featured, and reliable small arms bipod on the market. Designed in conjunction with top-level competitive shooters, the S7 has revolutionary patent-pending features not found on any competing bipod. It gives the shooter the control and stability needed to make the perfect shot, even under the most difficult circumstances. The S7 was specifically designed with the long-range competition shooter in mind.
The S7™ will enhance all precision for shoulder-fired weapons systems of calibers up to, and including the .50 cal BMG. Easy to install and use, the S7 quickly installs on any standard mil-spec “Picatinny” rail. Expertly designed and manufactured, it is the only bipod that offers perfectly smooth tracking and canting features, allowing the shooter to engage moving targets and transition from target to target without any vibration or variation in accuracy. The S7 features positive bipod leg lock-up at 0°, 45°, 90°, 135°, and 180° degrees. Available in 7”-9” and 9”-12” versions with either Rubber or Raptor Claw feet. 100% Made in the USA at the KFS Industries manufacturing facility based in Atlanta, Georgia. The S7 has a clear advantage in the long-range, precision shooting category. Full control and F-Class stability, in a lightweight compact package.
The S7 Bipod is 100% made out of American metals, on American soil, and assembled, right here in the USA! The S7 bipod is a division of KFS Industries Inc. (formerly Keng's Firearm Specialty) based in Atlanta, Georgia. If you need more specifications, or further information regarding the S7 Bipod please contact our Corporate headquarters at (404) 382-5929 or send us an email. Contact Us
Design and Conception
The S7™ bipod was designed to give the modern competition shooter who employs larger caliber more accurate rifles, a suitable support. There are several high-end bipod manufactures in the firearm industry. However, we have found that most bipods on the market all have their own limitations. Some manufactures choose to build their products out of softer materials, and integrate the bare minimum when it comes to the features. Most high-end bipods are made from Aluminum. While it may be a little lighter, they are prone to breakage on the larger caliber rifles. These manufactures also only allow 15° of cant rotation, so you have to take your shot in some cases with an un-level scope. This greatly affects the long-range accuracy of your rifle. (Most manufactures only allow up to 15° panning or canting ability)
KFS Engineers listened to top-level competitive shooters, to find out precisely what was needed in a bipod. We used that information to build a bipod that met those needs exactly. Everyone agreed it needed to be rugged, reliable, have a smooth pan and track feature, a smooth tilt feature, tension adjustment until lock for both, and have absolutely no “play” from any of the features.
Like most revolutionary gear (red dots, modular forends, muzzle-breaks, enhanced scope rings, match grade barrels ect.) the S7 bipod was tested in competition. Two prototypes were use by top USAMU snipers to compete in, and win, the 2012 International Sniper Competition in Fort Benning, GA. KFS then asked for input from the world class snipers at the competition, and made a few final adjustments to ensure that you, as the end user, would get exactly what you need. What came about was the final edition of the S7™ bipod.
S7™ Technical Information
| Height: | 7" to 9" (Legs fully deployed) or 9" to 12" (Legs fully deployed) |
| Weight: | 3.00lb |
| S7 Body: | Steel Forging |
| Steel Parts: | Nitrocarburized to prevent rust (Matte Black) |
| Aluminum: | Hard Cote (Type III, Class II) Anodized |
| Inner Bearings: | Sealed & Enclosed to eliminate maintenance |
| Springs: | E-coated to prevent corrosion |
| Feet Type: | Rubber (Santoprene®) or Raptor Claw |
| Strength: | 1470 LBF (Legs retracted), 1010 LBF (Legs deployed) |
| S7 Fits: | MIL-STD 1913 Picatinny Rail, All calibers up to and including .50 BMG |
Click the links below for a free digital copy download of the S7 User Manual. We will also be including our retail flyers, and other S7 downloads in the future, as the come available. Be sure to check back often and save is to your favorites!
S7™ Downloads |
|
 S7 User Manual |
 S7 Flyer |
The S7 Bipod is 100% made out of American metals, on American soil, and assembled, right here in the USA! The S7 bipod is a division of KFS Industries Inc. (formerly Keng's Firearm Specialty) based in Atlanta, Georgia. If you need more specifications, or further information regarding the S7 Bipod please contact our Corporate headquarters at (404) 382-5929 or visit our contact page for more information. Contact Us
S7 Exploded View
Steel forging is used on the bipod body to increase strength. All springs throughout the S7 bipod are E-coated to prevent corrosion. The innovative clutch-type locking leg design provides maximum contact, while maintaining tight tolerances for ease of use. The inner S7 bipod legs are machined out of High- Tensile Strength AISI 7075 Aluminum Alloy (Type III, Class II). The inner bipod leg is also housed in a .500” deep Santoprene® foot cup. This provides more durability, stability, and protection against harsh elements.
